1.Hold button (rounded front button) to turn off device first.
2. Hold up (rounded front button) but in up position about 4 seconds, it will enter setup mode.
3. Change setup: It have some settings like unit meter/inch, error correction etc.
I'm too lazy to make video about it. You know it take time to editing. I will update some photo about it and real use case review later.
Notes:
I've got problem when using this LS-P, I often press up button two time for distance measure, but one moment I have no idea why my unit have changed to inches which I am not familiar with.
So I have dig into Internet without luck, then dive into manual note in Chinese. After translation I found out how it work.
It's is some how like Hakko Fx-888 or some other device with limited button for user interface like Garmin eTrex... And from view of a software engineer, It not hard to understand the mechanism under it.
I never use the device for 3 months then it unable to operate. It warmed temperature when charge via USB but still not operate. Any suggestion please.
ReplyDelete